SmallHD Cine 7 with Bolt 4K RX

An on-camera monitor and wireless receiver configuration, with a separate Nucleus-M option.

TYPICAL KIT CONTENTS
Monitor and wireless kit
1 × SmallHD Cine 7 with Bolt 4K Module and V-Mount Plate
1 × Bolt 750 12G-SDI/HDMI Wireless TX V Mount
9 × Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
1 × Bolt 4K TX Mounting Bracket
1 × Teradek Bolt 500 Velco Mounting Bracket and Screw
1 × Teradek Hot Shoe Mounting Bracket
1 × Lightstand Adapter 3/8in
6 × ¼” 20 screws
1 × SmallHD Cine 7 Ultraclear Screen Protector
1 × 18” HDMI Cable
1 × SDI 12G BNC to BNC Cable Length: 18in / 46cm
1 × 2pin Conn. to PowerTap - 18in Cable
1 × PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
1 × SmallHD Monitor Handles + Neck Strap
1 × 50ft HD-SDI Cable
1 × 8GB SD Card
1 × Noga Cine DG Hold-It Arm
1 × CoreSWX X2 V-Mount Charger
2 × CoreSWX HyperCore Slim 98 V-Mount Batteries
1 × Pelican IM2400 Storm Case with foam

Monitor with Nucleus-M
1 × SmallHD Cine 7 with Bolt 4K Module and V-Mount Plate
1 × Bolt 750 12G-SDI/HDMI Wireless TX V Mount
1 × Bolt 750 12G-SDI/HDMI Wireless RX V Mount
14 × Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
1 × Bolt 4K TX Mounting Bracket
1 × Teradek Bolt 500 Velco Mounting Bracket and Screw
1 × Teradek Hot Shoe Mounting Bracket
1 × Lightstand Adapter 3/8in
6 × ¼” 20 screws
1 × SmallHD Cine 7 Ultraclear Screen Protector
1 × 18” HDMI Cable
2 × SDI 12G BNC to BNC Cable Length: 18in / 46cm
2 × 2pin Conn. to PowerTap - 18in Cable
1 × PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
1 × SmallHD Monitor Handles + Neck Strap
1 × 50ft HD-SDI Cable
1 × 8GB SD Card
1 × Noga Cine DG Hold-It Arm
1 × CoreSWX X2 V-Mount Charger
2 × CoreSWX HyperCore Slim 98 V-Mount Batteries
2 × Smallrig Rosette to NATO bracket
1 × Pelican IM2400 Storm Case with foam
1 × Wireless Hand Unit (FIZ)
1 × Wireless Handgrip Left
1 × Wireless Handgrip Right
3 × Wireless Motors With Antennas
4 × Follow Focus Marking Disk
1 × 740mm P-Tap Power Cable
1 × Arri 3-Pin to 7-Pin Motor Power Cable
1 × RED Camera Control Cable
1 × LANC Camera Control Cable
1 × 296mm Motor Connection Cable
1 × 180mm Motor Connection Cable
1 × 560mm Motor Connection Cable
1 × Battery Charger + Power Cable
12 × EBL 3000mAh 3.7V Li-Ion Battery
2 × Handle to Arri Standard Rosette Adapter
2 × Handle to Gimbal Bar Adapter
1 × Controller Rosette Bracket
1 × Wireless Hand Unit Strap
1 × Hard Case

CONFIGURATION CHOICES
The booking button links to the Cine 7 / Bolt 4K kit with the Nucleus-M lens-control configuration. The equipment lists describe alternative configurations; contact us for a monitor-and-wireless kit without Nucleus-M.